Faulty clutch parts can make various noises. When an operator reports that a clutch is…

A dragging clutch will make the transmission or transaxle grind when trying to engage or…

A grabbing or chattering clutch will produce a very severe vibration or jerking motion when…

Slipping occurs when the driven disc fails to rotate at the same speed as the…

The hydraulically operated clutch is adjusted by changing the length of the slave cylinder pushrod.…

When a new pressure plate is installed, do not forget to check the plate for…

When the operator presses the clutch pedal, the clutch release mechanism pulls or pushes on…

The pilot bearing or bushing is pressed into the end of the crankshaft to support…

The flywheel is the mounting surface for the clutch (Figure 10-7). The pressure plate bolts…

The diaphragm pressure plate (Figure 10-6) uses a single diaphragm spring instead of coil springs.…