Posted inModelling and Simulation
Posted inMechanics of Machines
Epicyclic gear trains
1. If the axis of the shafts over which the gears are mounted are moving relative…
Posted inMechanics of Machines
Parallel axis gear trains
· Simple Gear Trains – A simple gear train is a collection of meshing gears where each…
Posted inMechanics of Machines
Gears And Trains
Introduction: The slip and creep in the belt or rope drives is a common phenomenon,…
Posted inMechanics of Machines
Worm, Rack and Pinion Gears
RACK AND PINION WORM GEAR RACK AND PINION: The rack and pinion is used to convert between…
Posted inMechanics of Machines
Involute gear
The involute gear profile is the most commonly used system for gearing today, with cycloid gearing still used for some specialties…
Posted inMechanics of Machines
Fundamental Law of Gear-Tooth
Pitch point divides the line between the line of centers and its positiond ecides the…
Posted inMechanics of Machines
Spur Gear Terminology
Spur Gear Terminology Addendum: The radial distance between the Pitch Circle and the top of the…
Posted inMechanics of Machines
Cam Design
The translational or rotational displacement of the follower is a function of the rotary angle…
Posted inMechanics of Machines
Classification of Cam Mechanisms
We can classify cam mechanisms by the modes of input/output motion, the configuration and arrangement…
Posted inMechanics of Machines
Layout of plate cam profiles
· Drawing the displacement diagrams for the different kinds of the motions and the plate cam…