Posted inFeatured
Posted inComposite Materials & Structures
Effective Axial Modulus
The unit cell as shown in Figure 7.2 is used to compute the effective axial…
Posted inComposite Materials & Structures
Strength of Material Approximations
In general, the laminates made are thin. Hence, for such laminates the analysis done using…
Posted inComposite Materials & Structures
Mass Fractions
Let and be the mass of fibres, matrix and composite, respectively. We know that (7.6) The mass…
Posted inComposite Materials & Structures
Volume and Mass Fractions, Density and Void Content
In the present section we are going to introduce some important concept of relative fraction…
Posted inComposite Materials & Structures
Micromechanics
Strength of Materials Approach Introduction In the earlier lectures we have used the effective properties…
Posted inComposite Materials & Structures
Glass Fibre
· Fibers of glass are produced by extruding molten glass, at a temperature around 1200 through…
Posted inComposite Materials & Structures
Boron Fiber
This fibre was first introduced by Talley in 1959 [15]. In commercial production of boron…
Posted inComposite Materials & Structures
Reinforcements materials and forms
Figure 1.6: Periodic Table showing the materials used in advanced composites (blue blocks) and conventinal…
Posted inComposite Materials & Structures
What are the types of fibres?
The fibres that are used in the fabrication of a composite can be divided into…
Posted inComposite Materials & Structures
Three moduli of elasticity
Depending upon the type of strain in the body there are three different types of…